Copper strip size:

Thickness range:

General copper strip: 0.01-2.0mm (commonly seen in brass strip, red copper strip, etc.).

Electrical copper strip (such as BS EN 13599 standard): 0.05-25mm, width 10-1250mm.

Chinese standard (GB/T 2059): thickness 0.5-0.8mm (tolerance ±0.012mm), width can be customized on demand (tolerance ±0.1mm).

Width range:

General copper strip: 4-600mm, industrial copper strip can be expanded to 8-1250mm (such as copper strip for transformer)

International Standards and Specifications

ASTM Standards:

ASTM B36: Applicable to soft annealed (O60 state) copper strip and plate of C23000 for general industrial use.

ASTM B152: Covers technical parameters such as tensile strength (≥195MPa) and elongation (≥30%) of copper strip.

European Standards (EN):

BS EN 13599:2014: Specifies the composition, electrical conductivity (≥100% IACS), thickness (0.05-25mm) and width (10-1250mm) of copper plates for electrical use, and includes tolerance requirements.

Chinese Standards (GB/T):

GB/T 2059: Requirements for thickness tolerance (±0.012mm), mechanical properties (such as tensile strength ≥195MPa) and surface quality of copper strip.

GB/T 17793—2010: Specifies the allowable deviation of the dimensions of copper strip, including width, length, straightness, etc.

Other standards:

DIN 17660: German brass alloy standard, covering the chemical composition and properties of CuZn15 (corresponding to C23000).

ISO 426-2: International general standard for copper-zinc alloys.